Stainless Steel Longtube Headers 1 3/4", 16g
primary tubes, 3/8" thick laser-cut flange, with a 4
into 1 Collector 3" diameter. Uses cylinder head
adaptor plates, and requires installation of
aftermarket K-Member. Legal in California only for
racing vehicles which may never be used upon a
Bassani has the experience to develop designs to optimize performance and the technical ability to implement these designs with minimal compromise. They believe in equal-length primary tube headers, even though these headers increase design time and are more difficult to fabricate, the stepped primary tubes are more advantageous for the vehicles. An exclusive wave isolation collector was also designed to induce scavenging effect and further improves performance. Bassani does all of their own tube fabricating, bending, welding, etc., and they will not compromise on the quality or thickness of the materials used.
- Mandrel Bent 14-Gauge Mild Steel Primary Tubes
- Wave Isolation Collector
- Gasketless Ball & Socket Connectors
- Thick 3/8-Inch Header Flange
- Covered by Lifetime Warranty
Testing has shown to see average increases of 10-12 HP/ 15 ft lbs Torque.
Bassani headers are designed to bolt-on directly between the cylinder heads. All gaskets, nuts, bolts, hardware and instructions are included for each application. Installation requires no cutting or welding. Install time averages 4 hours depending on experience and available resources.
Tech Notes On Bassani Stainless Steel Longtube Header: Slight modifications may be necessary. 49 States Smog Legal. Legal in California only for racing vehicles which may never be used upon a highway.
Feel free to place an order online and use our secure checkout 24 hours a day, 7 days a week, 365 days a year! Call Us M-F 9am-6pm PST @ (858) 527-2917.