Single adjustable, custom valved Konis in short coil-over strut housings, springs and camber/caster plates
Complete Shortened Front Strut Housing Machined from seamless DOM 1026 steel alloy tubing. Heavy-duty sway bar bracket welded on. The design is much stronger and more rigid than any of the aftermarket housings that are actually modified stock housings, with skip-welded gussets and and all original brake line and abs tabs retained.
Koni Single Adjustable Front Strut Struts are externally adjustable from underneath the hood, even with the factory strut brace. This strut is prepared for coil over use, and eliminates machining of critical suspension components.
Threaded Sleeves. This system is designed to eliminate stress risers caused by machining notches into the strut housing.
Adjustable Spring Perch A unique design, which uses an Allen head bolt to clamp the single threaded perch into the correct position. No secondary pieces are needed to "jam" the threaded perch into position.
1 Pair front Camber Plates
Camber / Caster Plates Correct camber adjustment at the top of the strut. Caster adjustment, aircraft bearings, engraved with calibrated degrees. Every component is anodized or plated, including fasteners. Adds extra travel to avoid excessive bottoming out, this is a very well engineered product.
Camber and caster are adjustable by sliding the mounts, without removing any components from the car. The priority of this design is to allow repeatable alignment changes which the S197 Mustang needs.
The camber plates feature a bearing and a bushing, which allows for articulation of the shock shaft. The steering bearing is very under stressed, as the design does NOT articulate the steering bearing.
4 springs, manufactured by Eibach, to custom specs
Eibach springs are made on German machines both in the USA and in Germany, however all Eibach springs have a lifetime guarantee against sagging, rate change, or any manufacturing or material failure. Lifetime guarantee. Compare.
2 bump stops (made in Germany)
We do not just ask you to reuse your stock bump stop. The stock bump stop is designed for stock suspension we provide a bump stop designed to work with the suspension. These are soft foam, same quality as OE Ford parts, but made to custom specs in Germany.
* Suspension is shipped completely assembled and preadjusted*
Feel free to place an order online and use our secure checkout 24 hours a day, 7 days a week, 365 days a year! Call Us M-F 9am-6pm PST @ (858) 527-2917.