MM Front Swaybar, 1979-93 Mustang, (1.125" OD, .188" wall thickness)

Improve front grip with this new MM Front Swaybar. Through our extensive on-track testing we found that the greatly increased wheel rates afforded by a conversion to coil-overs reduces body roll to the point that the stock front swaybar is too stiff, and the balance of the car shifts to understeer. A reduction in the front swaybar rate will increase front-end grip, improving the handling balance of the car. The higher the front coil-over spring rates, the more noticeable the improvement in front grip with the softer MM Front Swaybar.

We developed the MM Front Swaybar on our American Iron race car. It is considerably softer than the stock 5.0 Mustang swaybar, and works great with the MM Adjustable Rear Swaybars and coil-overs.

Lightweight tubular design. Powder coated black. Mounts in the same manner as a stock swaybar. Requires 1-1/8” swaybar pivot bushings. High performance end links are recommended.